Click-Fix Coping


Ali-Fabs Click-Fix metal coping is ideal for buildings under four storeys tall

The Click-Fix metal coping system is ideal for use on wall widths up to 450mm wide and is generally used on domestic installations and buildings below four storeys. Click-Fix is manufactured level to provide ease of use and flexibility for general builders and installers.

The aluminium system comprises of a concealed ‘Click-Fix’ bracket, incorporating an EPDM seal to securely fix the coping. Complete system with fully fabricated fittings available

Metal coping is a great choice for an economical and competitively priced metal coping system. With a simple clip-on fixing system, Click-Fix coping is the ideal solution for new and refurbished parapet and perimeter walls – it’s available in standard shapes and sizes and is generally used for low rise buildings. We can also make bespoke and special coping profiles to suit any job, including curved copings, tricky angles and even a checker plate design.

 

Key Features
aluminium-coping-capping-wall-copings-roof-cappings-building-height-icon

Generally used on buildings up to four storeys

aluminium-coping-capping-wall-copings-roof-cappings-wall-width-icon

Tailor-made to fit wall widths up to 450mm

aluminium-coping-capping-wall-copings-roof-cappings-paint-finish-icon

Wide range of colours and finishes

aluminium_capping_coping_domestic
  • Benefits
    • Suitable for wall widths 100mm – 450mm
    • Manufactured from 2mm thick marine grade aluminium
    • Supplied complete with concealed Click-Fix bracket at 1000mm intervals
    • High quality extruded aluminium Click-Fix bracket with slotted holes for height adjustment
    • Double width jointer bracket with integral EPDM rubber seal for complete weatherproofing integrity of each joint
    • Suitable for level installation, making all fittings universal for ease of installation (please note: There is a risk of ponding with flat copings)
    • Suitable for new buildings and refurbishment applications
    • Click-Fix fixing method with no visible fixings or penetration of the outside coping
  • Finishes
    aluminium_coping_powder_coated

    Polyester Powder Coated

    architectural_coping_aluminium_mill_finish

    Mill Finish

    aluminim_coping_anodised_anodized_effect

    Anodized Effect

    aluminium_coping_stone effect_finish_coating

    Stone Effect

    Textured_aluminium_coping

    Textured

  • Technical Info

    Sizing of Click-Fix Coping

    Ali-Fabs Click-Fix Coping is manufactured to a fixed profile front and rear dimension, as detailed, and is made to suit wall widths of between 100mm – 450mm.

    Standard front and rear projection is 35mm, which allows for a ventilation gap of approximately 17mm.

    Please note: There is a risk of ponding with flat copings.

    Curved or Radius Coping

    Copings can be produced to a true curve to suit both internal and external situations.

     

     

    click-fix-aluminium-coping-technical
  • Components

    Typical components for coping & capping

    Standard dimensional details available on request.

    90 degree External Angle 90_Ext_Angle_Coping_capping_ali-fabs
    90 degree Internal Angle 90-Int-Angle_Coping_capping_ali-fabs
    Apex Angle Coping-Apex_Coping_capping_ali-fabs
    Internal Stop End (Right Hand Shown) Stopend-RH_Coping_capping_ali-fabs
    Internal Upstand End (Left Hand Shown) Upstand-End-Left-hand_Coping_capping_ali-fabs
    Raking Angle Raking-Angle_Coping_capping_ali-fabs
    T-Section Coping T-Section_Coping_capping_ali-fabs
    True Curve True-Curve_Coping_capping_ali-fabs

    Bespoke Items
    Available
    on request

  • Downloads

View Our Projects

Easy-to-Fit Coping

Click-Fix Coping is manufactured from aluminium sheet and specially extruded aluminium straps with a neoprene rubber seal. With a unique push and click design it is easy to install and totally weatherproof making it the ideal solution particularly for renovation projects and low-rise buildings.

Click-Fix-aluminium-parapet-wall-Coping

Environmentally friendly

Aluminium is an environmentally friendly choice for wall coping, being 100% recyclable and the most abundant metal in nature. Over 90% of the aluminium we use in manufacturing is from recycled sources.

coping-capping-environmentally-friendly-recyclable

Curved or Radius Coping

We specialise in curved coping. If your project requires curved or radius coping we have a solution. We can manufacture and supply true curves or facetted coping in horizontal or vertical. Most complex curves can be easily achieved.

aluminium_curved_coping

Quick Downloads

Interested In This Product?

If you would like technical advice or pricing information for this product,
click on the button below for our contacts.

Contact Us

Our Other Products

Why Ali-Fabs?

aluminium-coping-capping-machinery

Unrivalled

machinery

Unrestricted

design possibilities

wall-copign-capping-design-cad-bim

From drawing
to delivery

we’ll take your project from initial design to finished product

ali-fabs-capping-coping-aluminium

Tried & Tested

on commercial and residential buildings in the UK and overseas

The Guttercrest Group

Guttercrest aluminium coping capping

Manufacturers of aluminium rainwater gutters and downpipes

Husk Architectural Aluminium

Manufacturers of aluminium facades and fabrications

Contact Us:

Direct Line:01691 66 33 22

Click here to email us